Regardless of the choice of a mobile operator, the quality of mobile communication will depend on the network coverage and the level of load on the nearest base stations. Within large cities, communication quality problems often do not arise. When multiple mobile devices are connected to base stations, congestion can occur, due to which the quality of communication is significantly reduced.
Operators promptly respond to such problems by installing additional base stations. As for the situation outside major cities, as well as in warehouses, communication problems are much more common there. Landscape features affect the quality of the cellular signal. Wherever you are, you can always get rid of problems with the poor quality of mobile communications using a repeater – an amplifier that allows you to stabilize the quality of the signal coming from the base station. In this article, we will look at tips for choosing mobile signal booster services for warehouses in 2023.
The Main Reasons For the Drop in Signal Strength on the Phone
The mobile signal booster allows you to ensure stable and high-quality radio signal reception from the base stations of your mobile operator. It happens that cellular communication works stably for a certain time, but subsequently, there is a weakening of the signal. There are only 4 reasons for this phenomenon, which we will consider in detail below.
Interference Between Base Stations
If we consider modern cellular technologies, they often operate on the same frequencies used to transmit a signal from base stations. When the subscriber’s phone is at the intersection of two such stations, he receives a signal from each of approximately the same level. At the same time, the remaining towers will create interference that will affect the operation of the cellular network. Signal degradation is inevitable.
This phenomenon occurs quite often, and sometimes subscribers cannot understand the reason for the deterioration in the quality of communication, since there are many base stations along the perimeter. As soon as the subscriber is on the edges of the cells, a decrease in the quality of communication will immediately appear. You can solve the problem using a repeater or changing the location of the mobile device.
1.Base station distance.
The radio signal weakens as it propagates through space. If the subscriber’s phone is far from the nearest carrier station, the signal will be weak. It is difficult for a smartphone to pick up a signal in this case, which leads to rapid consumption of battery power.
As for the cell tower, in this case, it will not hear the phone well, it will have to constantly connect to the network. You can also solve these problems with the help of a repeater, selected taking into account the existing features of receiving a cellular network signal.
2.All kinds of obstacles.
It often happens that outside the property there are no complaints about the quality of mobile communications, but inside the premises, the situation is radically worse. It is worth knowing that some building materials contribute to a decrease in the quality of a mobile signal.
It can be metal, wood, or glass. All these building materials have a negative impact on the quality of the mobile network.
If there are numerous trees or other vegetation on the territory, the cellular signal will be partially blocked. When the property is located outside the city and in the lowlands, problems with the quality of cellular communication will also appear.
In cities, the signal level is negatively affected by dense buildings, so you have to use cellular amplifiers to get rid of problems when using voice communications and mobile Internet.
How Does a Cell Phone Repeater Work?
A cellular repeater is a rather complex device that is used to amplify the incoming and outgoing signals from the base stations of mobile operators. This device makes it possible only to locally solve problems with poor quality of the cellular network.
The package includes special antennas that are connected to the repeater via a special cable.
Principle of operation:
- An external antenna, which is included in the equipment delivery set, is used to directly capture the signal coming from the base station;
- The amplifier processes and amplifies the received data with hardware resources;
- The increased signal is broadcast to an internal antenna, which is often built into the amplifier itself;
- The signal is transmitted from the internal antenna to the mobile devices of subscribers.
The Main Mistakes When Choosing a Cellular Amplifier
Understanding the principle of operation of the device and choosing a high-quality repeater are not the same thing. There are many nuances, and without knowing which, you can be tempted by the low price and attractive design of the repeater, but get a completely useless device. Therefore, let’s look at the main mistakes when choosing a repeater.
1.A repeater with a manual antenna gain control.
You can be tempted by the presence of such a function, and it is easy to understand you: it would seem that it expands the capabilities of the device, and increases its efficiency.
But in practice, everything is more difficult. You can load the operator’s base station so much or extremely underestimate the antenna gain.
2.Amplifier and power supply in one box.
Many repeater manufacturers offer a built-in power supply as an advantage. At first glance, they are right – fewer details and more convenience.
But, as practice shows, about 93% of all warranty cases are related to the failure of the power supply. Power surges, and thunderstorms are not uncommon, and these things are extremely dangerous for the power supply. But, unfortunately, few people think at the time of purchase that, due to such an advantage, the repeater will need to be carried to the workshop.
3.Buying a repeater without testing.
If the seller does not provide an opportunity to test the equipment in your conditions, this is a good reason to refuse the purchase. The effectiveness of the device is determined by a complex of various factors: deviation in the direction of the antenna, wall material, area of the premises, terrain features (forest, presence of metal structures nearby, lowland, etc.)
A repeater is a very useful device for amplifying a mobile signal in areas and rooms where it is very weak or non-existent. If you are looking for quality mobile signal booster services for warehouses, contact Uctel specialists. The company’s amplifiers allow you to maintain the continuity of working communications within the warehouse, which is extremely important for modern business. You can amplify both 3G and 5G signals in any problem area, including schools, hospitals, elevators, and parking lots.